CPR Training Solution

External chest compression force feedback module. The module collects the compression signal through the pressure sensing unit and drives the LED strip to display the compression force in real time: when the force is small, one light bar is illuminated; as the force increases, the light bars are illuminated step by step; when the force is large, the entire light bar is illuminated. When the compression force reaches the preset appropriate range, the module emits a prompt sound to inform the trainee, “This force is correct this time.”

Thin-film pressure sensors
use high-tech raw materials

Array sensor FS-ARR-6×6-ROT is made of excellent mechanical properties
Polyester film, composed of highly conductive materials and nano-scale pressure-sensitive materials,
The top layer is a flexible film and a pressure-sensitive layer compounded on top, and the bottom layer is soft
Sexual film and composite on the top of the conductive circuit. Both through double-sided tape
Bonding and isolation of the sensing area. When the sensing zone is pressurized, it is on the bottom layer
Lines that are disconnected from each other are channeled through the top-level pressure-sensitive layer of the port
The output value of the resistor varies with the pressure.

Back Home

Go To Alibaba.com