The FS-INS-16Z is a flexible insole sensor with 16 sensing zones for multi-point plantar contact sensing. Each zone provides a resistance response to applied force. A compatible acquisition circuit is required to read the sensor, and calibration is required to convert readings into force or pressure values.
Request Samples | Request a Bulk Quote | Discuss a Custom Insole Sensor
| Thickness: | 0.4mm |
| Shape: | Sheet |
| Actuation force : | 500g |
| Sensitivity range: | 500g-10Kg |
| Resolution: | continuous |
| Non-actuated resistance: | >1M Ω |
| Response time: | <10us |
| Operating temperature: | -40℃~+85℃ |
| Life time: | >1 million |
| Repeatability: | +/-10% @ 2Kg.Single |
| Res. range: | 20K to 200K ohms |
| EMI: | Generates no EMI |
| EDS: | not ESD sensitive |
| Whether it is dustproof and waterproof： | Dust/Waterproof IP67 |
The sensor has 20 terminals: 16 sensing-zone terminals, 2 common terminals, and 2 unused terminals. Follow the current sensor drawing for the pin assignment and mating connector. Use compatible multi-channel acquisition electronics to read the 16 zones.
The sensor itself outputs resistance changes. PC or phone integration requires acquisition hardware and a compatible communication interface. Confirm the interface and protocol for the selected acquisition kit.
Confirm the calibration supplied with your acquisition hardware and software. Raw readings require calibration under known loads before conversion to force or pressure units. Pressure conversion also requires a defined contact area.
Request the Current Datasheet, Pinout Drawing, and Acquisition Options
Include your application, target load, shoe or insole dimensions, preferred interface, and sample quantity. Our team can review the sensor and acquisition requirements together.